RECORDER PART
Tracks
2 (stereo)4 (stereo x2) * WAV x 2 recording mode only
Signal Processing
AD/DA conversion: 24 bits, 44.1/48/88.2/96 kHz
Data Type
[For Recording] * Stereo only WAVE:
Sampling Rate: 44.1/48/88.2/96 kHz
Bit Depth: 16/24 bits
MP3 (MPEG-1 Audio Layer 3):
Sampling Rate: 44.1/48 kHz
Bit Rates: 64/96/128/160/192/224/320 kbps
WAVE + MP3:
Sampling Rate: 44.1/48 kHz
Bit Depth: 16 bits
Bit Rates: 128 kbps
WAVE x 2:
Sampling Rate: 44.1/48 kHz
Bit Depth: 16/24 bits
[For Playback]
WAVE:
Sampling Rate: 32/44.1/48/88.2/96 kHz
Bit Depth: 16/24 bits
MP3 (MPEG-1 Audio Layer 3):
Sampling Rate: 32/44.1/48 kHz
Bit Rates: 32—320 kbps or VBR (Variable Bit Rate)
*The Internal Mic and the MIC/AUX IN can’t be used at the same time; only the MIC/AUX IN is effective.
*The Internal Speaker and the Phones can’t be used at the same time; only the Phones is effective.
Transmitting Power: Specification Power Class 2 (Line of sight range 10 m (30 ft))
Profile Support: A2DP, AVRCP
CODEC Support: SBC, Qualcomm aptX Qualcomm aptX low latency
or Supplied from the computer via USB
* This can vary depending on the specifications of the batteries, capacity of the batteries, and the conditions of use.
microSD card (inserted in the R-07)
Batteries (two AA)
Stereo Microphone: CS-15S
Memory Card
microSD Card SDHC format compatible
INPUT/OUTPUT
Audio Inputs
Internal Stereo Microphone MIC/AUX IN (Stereo miniature phone type, plug-in powered mic)
Audio Output
Phones (Stereo miniature phone type) Internal Speaker for playback (monaural)
Nominal Input Level (Variable)
MIC/AUX IN: -31 dBu (Default input level) * 0 dBu = 0.775 Vrms
Input Impedance
MIC/AUX IN: 4.5 k ohms
Output Level
3 mW + 3 mW (In case 16 ohms load)
Recommended Load Impedance
16 ohms or greater
Frequency Response
20 Hz – 40 kHz (+-3 dB)
USB Interface
USB port: USB Micro-B type support USB 2.0/1.1 mass storage device class
BLUETOOTH
Bluetooth
R-07 Remote: Bluetooth technology: Bluetooth Ver 4.0 Audio transmission: Bluetooth technology: Bluetooth Ver 3.0
EFFECTS
Effects
Playback only. Excludes playback in 88.2 kHz or 96 kHz. Reverb and Speed Change can’t be used at the same time.
Reverb
4 types (Hall1, Hall2, Room, Plate)
Speed Change
50 – 150 % of playback speed
OTHER
Display
Graphic LCD 128 x 64 dots (white backlit)
Power Supply
Alkaline battery (AA, LR6) x 2, or Rechargeable Ni-MH battery (AA, HR6) x 2,
Current Draw
350 mA (MAX)
Duration of continuous use with Alkaline battery operation
Playback: Approximately 15 hours Recording: Approximately 15 hours
Accessories
Leaflet “Read Me First” Owner’s manual
Options
Microphone Stand Adaptor: OP-MSA1 Binaural Microphones/Earphones: CS-10EM
SIZE AND WEIGHT
Width
61 mm 2-7/16 inches
Depth
103 mm 4-1/16 inches
Height
26 mm 1-1/16 inches
Weight (including batteries)
150 g 6 oz